Table of Contents
Advertisement
VITEK 5-in-1 CCTV TESTING MONITOR
（ （ 4） ） Port Flashing
Connect a network cable to the switch "LAN" port, click the icon
to open the Port Flashing
app. Click "Start". The IP tester sends a unique signal to make the connected LAN port of the switch
flash.
If the tester and PoE switch are connected properly, the LAN port of POE switch flashes at a special
frequency, if not, test different LAN port
Application:
The tester will send special signals to make the connected LAN port flicker at a special frequency, which
will enable the installers to easily and quickly find the connected Ethernet cable. This function can prevent
mistaken insertion or disconnection of non-corresponding cables to artificially interrupt network
connection.
Page 43
Advertisement
Table of Contents
