Table of Contents
Advertisement
VITEK 5-in-1 CCTV TESTING MONITOR
3.3.15 Data monitor
Please click icon
Click "Setting" to choose the baud rate of RS485/RS232; it must be the same as the DVR or the Control
keyboard. The DVR or Control keyboard send the code to the tester. If it can be read, the protocol will
show on the upper right, like Pelco D, if not, like P: ---
While the tester receives the code, press the "Return" key to clear.
Through the RS485 port, display the PTZ control code of the multifunctional keyboard or the DVR.
The controller can check the status of the RS485 transmission through the code on the display. (The
RS485 communication rate must be the same.)
Application: Check the RS485 communication states of the video optical transmitter to see if it's
normal. An engineer can analyze the protocol and check the data through the displayed code.
3.3.16 Audio player
Click the icon
to enter
to enter. The audio player only supports MP3 format Audio files.
Page 49
Advertisement
Table of Contents
