Ip Camera Tester Introduction; General; Packing List - Vitek VT-SCT-U4 Manual

Four inch hand-held 5-in-1 [4k h.265 ip / tvi / cvi / ahd / cvbs cctv] testing monitor

Table of Contents

VITEK 5-in-1 CCTV TESTING MONITOR

2. IP Camera Tester Introduction

The 4-inch IPS touch screen IP camera monitor is designed for maintenance and installation of IP

cameras, analog cameras, TVI, CVI AHD cameras, as well as testing 4K H.264 /4K H.265 cameras by

mainstream. The 800 x 480 resolution enables it to display network HD cameras and analog cameras in

high resolution. This unit supports many ONVIF PTZ models, and analog PTZ control. The

combination of touch screen and key buttons make this IP camera tester highly user- friendly.

The tester is also a great tool for Ethernet network testing. Other functions include providing 25.5W

PoE power to a camera, PING and IP address searching, LED Flashlight, DC 12V 3A power output and

much more. Its portability, user-friendly design and other functions make the IP tester an essential tool

for all installers or technicians.

1) Tester

2) Adaptor DC12V 1A

3) Polymer lithium ion battery (7.4V DC 2400mAh)

4) BNC cable

5) RS485 cable

6) Output Power cable

7) Audio cable

8) Wrist belt

9) Tool bag

Page 2

Table of Contents