Table of Contents
Advertisement
VITEK 5-in-1 CCTV TESTING MONITOR
PTZ address scan: You can toggle the PTZ Address scan off or on before entering the "PTZ
controller" app. This needs to be turned on in order to use the PTZ Scan feature of the PTZ app.
Online Registration: Online update needs to register first. After the tester connects to the network, fill
in registration information to register.
User Feedback: If you have any comments or suggestions for the tester, please connect it to network
and write your feedback.
Lock Screen: The tester default is not locked. You can choose password Lock screen, pattern Lock
screen or "NO"
Password Lock Screen: Set password by inputting digits, letters or characters as the password, then
input it again to confirm. When the tester is in standby mode or when you turn it on, you can input your
password to enter.
Pattern Lock Screen: Drawing a pattern to lock. While the tester is in standby mode or turn it on, you
can input your pattern to enter. Modify Lock screen password > you need to input lock password again.
Select password Lock screen or pattern Lock screen to reset lock screen password. After reset pattern
lock screen, you need to draw a new lock pattern.
Restore the factory settings: If the tester is restored to factory settings, all your personal files and apps
will be removed.
3.3.25 File explorer
Click "File" on the top bar tool. You can select internal or external storage. Click on the upper right
corner Icon "...". will pop-up menu, you can select other operation or exit
Page 58
Advertisement
Table of Contents
