Controller Log Screen - Siemens UTMC OTU Handbook

This screen allows the user to display historic information transferred from an attached
Siemens ST700/750/800/900 family controller. The log is updated periodically (default
10 minutes).
The log text is generated with the same format as that used on the controller handset in
response to the 'LOG' command. Details of the fault numbers and mnemonics are
contained in the controller handbook.
Lines
This field sets the number of lines to be displayed on each page. Use 'Update
Page' to apply the new setting.
Newest at top
Select this field to order the log entries so that the more recent events are at the
top of the page. Use 'Update Page' to apply the new setting.
Oldest at top
Select this field to order the log entries so that the more recent events are at the
bottom of the page and the older events are at the top of the page. Use 'Update
Page' to apply the new setting.
Older
Change to the next oldest page of log entries.
667/HB/31601/000

6.8 CONTROLLER LOG SCREEN

Page 60
UTMC OTU/MOVA Handbook
Issue 5