5. When prompted select the Serial Port Service (SPP) from the list of device services
and click "Next"
6. Make a note of the COM port assigned to the Bluetooth link, click "Next" through the
remaining screens to finish the wizard
7. Right click the AIRserial3X connection icon in the Bluetooth settings window and
select the "Connect" option. Enter the PIN code if prompted.
8. Upon a successful connection – the icon should change, indicating a successful link.
9. If the connection "Bluetooth link to Gemini" has already been set up then go to
"Setting up the PPP over Bluetooth-serial connection" Step 9; otherwise go to
"Setting up the PPP over Bluetooth-serial connection" Step 1.
667/HB/31601/000
Page 122
UTMC OTU/MOVA Handbook
Issue 5