Siemens UTMC OTU Handbook page 66

To import:
Press the 'Browse' button, and navigate to select an instation CSV file from
your computer.
Select either:-
'Freestanding OTU' – where the control and reply bits are wired to the
o
controller via individual I/O signals or
'Semi-integral OTU' – where the control and reply bits are passed across
o
the serial interface to a Siemens controller.
Press 'Import' to upload the selected file.
Add Uni Directional Loops if required using "Go to UD Options" button
Edit each site and update the configuration as required to match the
installation.
Press "Save to File" to make the settings permanent and active
Go to UD Options
Opens the Uni Directional Loop options page, where UD loops can be added to
the configuration and edited.
Add Site
This button adds a site with a default site name to the configuration. The site
name should match that used by the UTC instation.
Edit (site)
To view or edit the contents of a site, press the 'Edit' link next to its name
Rename or Delete
To change the site name, edit the name in the text box, then press 'Rename or
Delete' before continuing.
To delete a site, select the tick box next to the site name, and press 'Rename or
Delete'.
Save to File
No settings are written to the Gemini, or take effect until the 'Save to File' button
is pressed.
Over the course of the edit session, press 'Submit' on each page to hold
changes, until all edits are completed.
When 'Save to File' is pressed, the entered configuration is first validated. If all
settings are correct, the configuration shall be saved permanently, and take
effect on the operation of the outstation.
If invalid settings are found, they and the site in which they are contained are
highlighted red. A configuration containing mistakes will not be saved.
Revert Changes
'Revert Changes' cancels all submitted changes from the current editing session
and the configuration data is re-loaded.
Func
This field dictates the function UTMC is configured to perform on the controller or
other street equipment via the selected bit.
667/HB/31601/000 Page 66
UTMC OTU/MOVA Handbook
Issue 5