Siemens UTMC OTU Handbook page 69

3
* These reply bits are controlled by processing within the OTU. See section
6.11.3 for additional Count and Occupancy configuration and 6.11.4 for
additional Queue configuration. The SCOOT inputs are sampled 4 times per
second and can be mapped to either OTU inputs, a UD unit or controller
detectors via the controller serial interface.
The following input functions are used locally with MOVA control:-
MOVACRB
MOVADETn
No.
Instance Number: Where the function operates on a group of bits, this field
identifies which stage, detector, SCOOT unit, etc, being controlled or monitored
by the item.
Numbering starts from One.
A '-' indicates that only one instance of this function should be used on each site.
UTC Offset
This field indicates the ordering of bit functions at the UTC Instation. When
running full UTC (UTC type 2), this field is for information only. When running
simple UTC (UTC type 1), this field is used to control the position of bits in the
control and reply words.
The numbering starts at One. Note that on the Siemens instation MONI screen
the bit displays are numbered from zero so that for example bit 004 on MONI
would be given a UTC offset of 5.
Functions which are only local to the outstation such as MOVATO and TC should
be given an offset of zero.
Direction
This field indicates whether the item is an output (Control) or input (Reply).
Card/Port
Select the IO Port, or serial connection to be used:-
cpu.in.1
busmova1.in.1
busmova2.in.1
busmova3.in.1
csi.reply.in.1
csi.det.in.1
csi.cond.in.1
csi.crb.in.1
UD1, 2 etc
667/HB/31601/000
MOVA Controller Ready Bit
MOVA Detectors
8 inputs on CPU card
48 inputs on I/O card 1
48 inputs on I/O card 2
48 inputs on I/O card 3
32 inputs from controller serial interface
64 detector states from controller serial interface
16 conditioning inputs from controller serial interface
1 controller ready bit from controller serial interface
Uni-direction unit 1, 2 etc. when configured on UD Options
screen.
Page 69
UTMC OTU/MOVA Handbook
Issue 5