Load Fail-Safe Defaults; Load Optimized Defauls; Set Supervisor Password/User Password - Procomp BVD2A Manual

BVD2A

3.10 Load Fail-Safe Defaults

This option opens a dialog box that lets you install fail-safe defaults for all
appropriate items in the whole setup utility. Press the Y key and then Enter to
install the defaults. Press the N key and then Enter to not install the defaults.
The fail-safe defaults place no great demands on the system and are generally
stable. If your system is not functioning correctly, try installing the fail-safe
defaults as a first step in getting your system working properly again. If you
only want to install a fail-safe defaults for a specific option, select and display
that option, and then press the F6 key.
3.11 Load Optimized Defaults
This option opens dialog box that lets you install optimized defaults for all
appropriate items in the whole setup utility. Press the Y key and then Enter to
install the defaults. Press the N key and then Enter to not install the defaults.
The optimized defaults place demands on the system that may be greater than
the performance level of the components, such as the CPU and the memory.
You can cause fatal errors or instability if you install the optimized defaults
when your hardware does not support them. If you only want to install setup
defaults for a specific option, select and display that option, and then press the
F7 key.
3.12 Set Supervisor/User Password
These two items can be used to install a Supervisor Password and a User
Password. If you log on as Supervisor, you have full access to the system, and
you can restrict the permissions granted to someone who logs on as User. For
example, a Supervisor can restrict a User from entering the setup utility.
To install a Supervisor or User Password, follow these steps:
1. Highlight the item Supervisor/User password on the main menu and press
Enter.
2. The password dialog box will appear.
3. If you are installing a new password, you cannot use more than 8 characters
or numbers. The password will differentiate between upper case and lower
characters. Press Enter after you have typed in the password. If you are
deleting a password that is already installed just press Enter when the
password dialog box appears.
~53~