Load Bios Default; Load Setup Default; Supervisor / User Password Setting - Procomp B683 User Manual

B683/B680

Load BIOS Default

When you access "Load BIOS Default", the following message appears:
Load BIOS Default (Y/N) ?N
The BIOS Default values are the "worst case" default, and are the most stable
values for the system. Use them if the system is performing erratically due to
hardware problems. To load the BIOS Default values, press <Y> then
<Enter>.

Load Setup Default

When you access "Load Setup Default", you are shown the following message:
Load Setup Default (Y/N) ?N
The Setup Default values represent the "best case" default, and should provided
optimum system performance. To load the Setup Default values, press <Y>
then <Enter>.

Supervisor / User Password Setting

When you select this function, the following message will appear at the center
of the screen to assist you in creating a password.
ENTER PASSWORD
Type the password, up to eight characters, and press <Enter>. The password
typed now will clear any previously entered password from CMOS memory.
You will be asked to confirm the password. Type the password again and press
<Enter>. You may also press <Esc> to abort the selection and not enter a
password.
If you select System at Security Option of BIOS Features Setup Menu, you will
be prompted for the password everytime the system is rebooted or anytime you
try to enter Setup. If you select Setup at Security Option of BIOS Features
Setup Menu, you will be prompted only when you try to enter Setup.
37