Procomp BVD2A Manual page 5

BVD2A
Architecture
Clock Generator
DRAM Modules
BIOS
On Board I/O
On Board IDE
Port
Expansion slot
I/O Chip
Other Feature
Board Size
66, 100, up to133Mhz
168 pin DIMMs x 3, max. 256MB each
Supports total of 8MB to 768MB SDRAM.
2MB Award PnP BIOS with enhanced ACPI feature for
PC98 compliance.
Supports 120MB ATAPI floppy disk.
Supports ZIP disk drive.
Supports multi-boot from IDE,SCSI,CD-ROM and FDD.
Supports software clock control.
Supports Trend™ ChipAway AntiVirus.
Supports HDD S.M.A.R.T.
1 Floppy port (up to 2.88MB, 3 mode floppy supported
& LS-120).
2 Serial ports, 1 Parallel port (SPP/EPP/ECP).
2 USB, 1 PS/2 mouse, 1 PS/2 keyboard.
1 IrDA.
Dual Ultra DMA 33/66 IDE ports
Supports ATAPI IDE CD-ROM & LS-120.
1 x 64-bit AGP slot. Supports AGP 4X Mode
5 x 32-bit PCI slots. (5 Master, 1 Share)
2 x 16-bit ISA slots. (1 Share)
Winbond super I/O W83977TF-AW.
Supports keyboard & mouse power on feature with ATX
power.
Supports Wake-up by Alarm
Wake-up On LAN header.
ATX form factor
Size : 305mm x 210mm (12" x 8.26")
~4~