How To Install The Cpu - Procomp BVD2A Manual

BVD2A
2.3-3

How to install the CPU

Prepare the motherboard by installing the supplied CPU-Socket 370, then
install the CPU according to the instructions supplied. Complete the processor
installation by installing the supplied heat-sink support, and connecting the
heat sink power cable to the motherboard connector.
Referential Steps of installing the Socket 370 CPU
This section is only for CPU installation, the motherboard in the picture is not
the BVD2A. Regarding the heat-sink, please refer to the instructions supplied.
1. Review the CPU and motherboard.
Socket 370 CPU
2. Pull the lever sideways away from the socket then raise the lever up to a
90-degree angle.
Bar
~21~
Motherboard
With Socket 370
Socket 370