Pnp/Pci Configurations - Procomp BVD2A Manual

BVD2A

3.7 PnP/PCI Configurations

The PnP/PCI Configurations page allows you to configure the ISA and PCI
devices installed in your system. The following screen appears if you select the
option PnP/PCI Configurations setup option from the main menu.
PNP OS Installed
If you have installed a Plug and Play operating system such as Windows 95 or
98, you can change this item to Yes. When the item is set to Yes you can use the
Device Manager utility in the operating system to make changes to the
configuration of expansion cards.
Resources Controlled By
You should leave this item at the default Auto. If you find that you cannot get a
particular expansion card to work properly, you might be able to solve the
problem by changing this item to Manual, and defining the characteristics of
the card in the new items which appear.
If you change this item to Manual, the display will list a series of items that
allow you to define the assignments of the system interrupt lines (IRQS) and
Default: No
Default: Auto<ESCD>
~50~