Pc Health Status - Procomp BVD2A Manual

BVD2A
Direct Memory Access (DMA) channels. As default, these items are set to
PCI/ISA PnP. If you install an ISA Bus card that does not support PNP, and it
requires a special IRQ and DMA, you can modify the list of assignments.
Change the values of the IRQ and DMA that are required to Legacy ISA.
PCI/VGA Palette Snoop
This item is designed to overcome some problems that can be caused by some
non-standard VGA cards. This board includes a built-in VGA system that does
not require palette snooping so you must leave this item disabled.
Assign IRQ For VGA
To assign an IRQ to VGA card if you enable this item.
Assign IRQ For USB
To assign an IRQ to USB Ports if you enable this item.

3.8 PC Health Status

On mainboards which support hardware monitoring, this item lets you set
parameters for critical voltages, critical temperatures, and fan speeds.
If this option is active on your system, we recommend that you accept the
default values for these items that are installed by the manufacturer.
Default: Disabled
Default: Enabled
Default: Enabled
~51~