Load Bios Default; Load Setup Default; Supervisor / User Password Setting - Procomp B687 Manual

B687
EPP (enhanced parallel port) or the ECP (extended capabilities port) make the
appropriate changes to this item. If you change the parallel port to EPP or ECP, new
items appear that let you
ECP Mode Use DMA
Select a DMA channel for the port. Choices are 3, 1.

Load BIOS Default

When you access "Load BIOS Default", the following message appears:
The BIOS Default values are the "worst case" default, and are the most stable
values for the system. Use them if the system is performing erratically due
to hardware problems. To load the BIOS Default values, press <Y> then
<Enter>.

Load Setup Default

When you access "Load Setup Default", you are shown the following
message:
The Setup Default values represent the "best case" default, and should
provided optimum system performance. To load the Setup Default values,
press <Y> then <Enter>.

Supervisor / User Password Setting

When you select this function, the following message will appear at the
center of the screen to assist you in creating a password.
Load BIOS Default (Y/N) ?N
Load Setup Default (Y/N) ?N
43
Default: 3