Table of Contents
Advertisement
Quick Links
Contents
CH1. MOTHERBOARD FEATURE...........................................................1
!SPECIFICATIONS ..........................................................................1
!POWER OFF CONTROL SOFTWARE .........................................3
!PACKAGING CHECK LIST ..........................................................3
CH2. SETUP GUIDE.....................................................................................4
!MAINBOARD LAYOUT DRAWING............................................4
!JUMPER & CONNECTOR SETTING ...........................................6
CONNECTOR SETTING ...............................................................6
PANEL - OTHER JUMPER SETTING ........................................10
CPU TYPE SELECT ....................................................................10
FAN CONNECTOR......................................................................18
!MEMORY INSTALLATION........................................................19
CH3. AWARD BIOS SETUP......................................................................20
!THE MAIN MENU .......................................................................22
!STANDARD CMOS SETUP.........................................................24
!BIOS FEATURES SETUP ............................................................25
!CHIPSET FEATURES SETUP .....................................................31
!POWER MANAGEMENT ............................................................32
!PNP / PCI CONFIGURATION SETUP ........................................38
!INTEGRATED PERIPHERALS ...................................................40
!LOAD BIOS DEFAULT ...............................................................41
!LOAD SETUP DEFAULT ............................................................41
!SUPERVISOR / USER PASSWORD SETTING..........................41
!IDE HDD AUTO DETECTION....................................................42
®
✒PENTIUM
II CPU INSTALLATION GUIDE ...................................P-1
REMARK
®
INTEL
is a registered trademark of Intel Corporation.
CONTENTS
i
Advertisement
Table of Contents
Subscribe to Our Youtube Channel
Related Manuals for Procomp B782
Summary of Contents for Procomp B782
-
Page 1: Table Of Contents
Contents CONTENTS CH1. MOTHERBOARD FEATURE............1 !SPECIFICATIONS ................1 !POWER OFF CONTROL SOFTWARE .........3 !PACKAGING CHECK LIST ............3 CH2. SETUP GUIDE..................4 !MAINBOARD LAYOUT DRAWING..........4 !JUMPER & CONNECTOR SETTING ...........6 CONNECTOR SETTING ...............6 PANEL - OTHER JUMPER SETTING ........10 CPU TYPE SELECT ..............10 FAN CONNECTOR..............18 !MEMORY INSTALLATION............19 CH3. - Page 2 Contents All other brands and product names are trademarks registered trademarks of their respective companies.
-
Page 3: Specifications
B782/B783 Chapter 1 Motherboard Feature SPECIFICATIONS V/A VT82C691 chipset, Winbond 83877TF System Chipset ® Pentium 66/100 MHz CPU CPU Bus Speed 233MHz ~ 450MHz CPU Clock Expandable to 384MB(3 banks) with 168-Pin Memory Subsystem SDRAM(DIMM) Socket X3 Two high speed 16550 compatible serial ports, one... -
Page 4: Ch1. Motherboard Feature
B782/B783 One speaker, one MIC, one Lin in, one Game port On-Board ESS1898 connector (Only For B782) Four PCI Master Slots & Two 16-bit ISA Slots Expansion slot Support 3.3/5V PCI bus Interface Suspend LED on/off Win95 soft power off... -
Page 5: Power Off Control Software
To restart the system , simply press the Power Button. In B782, ESS sound chipset is add-on. You can enjoy the 3D effect sound without sound card. The user-friendly sound card control panel also is free. - Page 6 B782/B783 Manual : User’ s manual...
-
Page 7: Ch2. Setup Guide
B782/B783 Chapter 2 SETUP GUIDE B782 Motherboard Layout Drawing T: Mouse JFAN1 B: K/B U S B 1/2 T: LPT1 B:COM1/2 VT82C691 T: Game Port B: Audio Port JFREQ1 AGP SLOT JIR1 PCI 1 LAN1 PCI 2 PCI 3 Audio... - Page 8 B782/B783 B783 Motherboard Layout Drawing...
-
Page 9: Jumper & Connector Setting
B782/B783 JUMPER & CONNECTOR SETTING Connector Setting PS1- PS/2 Keyboard/ PS/2 Mouse Connector Description Keyboard Data 2 , 6 N.C. Ground Keyboard Clock Description Mouse Data 8 , 12 N.C. Ground Mouse Clock USB1-Universal Series Bus (USB) Connectors USB1 Pin... - Page 10 B782/B783 JS1-ESS1898 Sound chip (Only for B782) Description Disabled Open Enabled Short CN1 – ATX Power Connector Description 1,2,11 + 3.3 V 3,5,7,13,15,16,17 Ground 4,6,19,20 + 5 V POWER GOOD 5VSB +12 V -12 V PS-ON - 5 V JIR1 – Infrared Connector : IR...
- Page 11 B782/B783 LAN1 Description LAN IN 5V-SB JPE1-Flash ROM Description LPT1- PRINTER Connector Signal Name Signal Name Strobe- Data Bit 0 Error Data Bit 1 INIT Data Bit 2 SLCTIN Data Bit 3 Data Bit 4 Data Bit 5 Data Bit 6...
- Page 12 B782/B783 COM1,COM2 - Serial Connectors Signal Name Signal Name SOUT J3-IO Queue Depth selection IOQ Depth 1-2 (Default) JSB1- For Sideband Signals Connector Ex. CREATIVE SB-LINK Connector Description -GNTA -REQA SERIRQ...
-
Page 13: Panel - Other Jumper Setting
B782/B783 PANEL1 – OTHER JUMPER SETTING HD_LED SMI_LED PW_ON PWR_LED KEYLOCK SPEAK CPU TYPE SELECT Pentium Processor JFREQ1: Ratio selection for CPU clock and host bus clock Core Freq./Bus Freq. JFREQ1 1-2, 3-4, 5-6, 7-8 1-2, 5-6, 7-8 3-4, 5-6, 7-8... - Page 14 B782/B783 • When CPU Frequency is 66.6MHz, SDRAM is 66.6MHz • When CPU Frequency is 100MHz, SDRAM has two Frequency: One is 66.6MHz, the other is 100MHz for your choice. CPU Bus Speed – 66.6MHz part : 1. 233MHz (SDRAM Frequency is 66.6MHz)
- Page 15 B782/B783 3. 300MHz (SDRAM Frequency is 66.6MHz) JFREQ1 Open Short Open Short JCK1~JCK4 (J3 :1-2 is default for IO Queue Depth) JCK1 JCK2 JCK3 JCK4 JFREQ1 4. 333MHz (SDRAM Frequency is 66.6MHz) JFREQ1 Open Open Short Short JCK1~JCK4 (J3 :1-2 is default for IO Queue Depth)
- Page 16 B782/B783 5. 366MHz (SDRAM Frequency is 66.6MHz) JFREQ1 Short Open Open Open JCK1~JCK4 (J3 :1-2 is default for IO Queue Depth) JCK1 JCK2 JCK3 JCK4 JFREQ1 CPU Bus Speed – 100MHz part (SDRAM Frequency is 66.6MHz) 1. 350MHz JFREQ1 Short...
- Page 17 B782/B783 2. 400MHz JFREQ1 Open Short Short Short JCK1~JCK4 (J3 :1-2 is default for IO Queue Depth) JCK1 JCK2 JCK3 JCK4 JFREQ1 3. 450MHz JFREQ1 Open Short Open Short JCK1~JCK4 (J3 :1-2 is default for IO Queue Depth) JCK1 JCK2...
- Page 18 B782/B783 4. 500MHz JFREQ1 Open Open Short Short JCK1~JCK4 (J3 :1-2 is default for IO Queue Depth) JCK1 JCK2 JCK3 JCK4 JFREQ1 5. 550MHz JFREQ1 Open Open Open Short JCK1~JCK4 (J3 :1-2 is default for IO Queue Depth) JCK1 JCK2...
- Page 19 B782/B783 CPU Bus Speed – 100MHz part (SDRAM Frequency is 100MHz) 1. 350MHz JFREQ1 Short Open Open Short JCK1~JCK4 (J3 :1-2 is default for IO Queue Depth) JCK1 JCK2 JCK3 JCK4 JFREQ1 2. 400MHz JFREQ1 Open Short Short Short JCK1~JCK4 (J3 :1-2 is default for IO Queue Depth)
- Page 20 B782/B783 3. 450MHz JFREQ1 Open Short Open Short JCK1~JCK4 (J3 :1-2 is default for IO Queue Depth) JCK1 JCK2 JCK3 JCK4 JFREQ1 4. 500MHz JFREQ1 Open Open Short Short JCK1~JCK4 (J3 :1-2 is default for IO Queue Depth) JCK1 JCK2...
-
Page 21: Fan Connector
B782/B783 5. 550MHz JFREQ1 Open Open Open Short JCK1~JCK4 (J3 :1-2 is default for IO Queue Depth) JCK1 JCK2 JCK3 JCK4 JFREQ1 FAN CONNECTOR JFAN 1 +12V... -
Page 22: Memory Installation
MEMORY INSTALLATION No jumper setting is necessary for DRAM setting, BIOS will check DRAM type and size automatically. B782 motherboard contains 3 by 168-pin DIMM sockets(DIMM1,DIMM2,DIMM3). B782 motherboard has table-free ( or auto-bank ) feature and user can install DIMM into any bank. -
Page 23: Ch3. Award Bios Setup
B782/B783 Chapter 3 AWARD BIOS SETUP Award BIOS ROM has a built-in Setup program that allows users to modify the basic system configuration. This type information is stored in battery-backed RAM so that it retains the Setup information when the power is turned off. - Page 24 B782/B783 Right Arrow Move to the item in the right hand Esc Key Main Menu Quit and not to save changes to CMOS Status Page setup menu and Option Page Setup Menu Exit current page and return to Main Menu...
-
Page 25: The Main Menu
B782/B783 The Main Menu Once you enter Award BIOS CMOS Setup Utility, the Main Menu will appear on the Screen.. Use arrow keys to select among the items and press to accept or enter the sub-menu. ROM PC/ISA BIOS (2A6LFPN9) CMOS SETUP UTILITY AWARD SOFTWARE, INC. - Page 26 B782/B783 This menu provides functions for Green products by allowing users to set the timeout value for monitor and HDD. PNP / PCI CONFIGURATION SETUP This menu allows the user to modify PNP / PCI configuration function. Load BIOS Defaults BIOS defaults indicates the most appropriate value of the system parameter which the system would be in minimum performance.
-
Page 27: Standard Cmos Setup
B782/B783 ON NOW FUNCTION User can select the way to power on system from BIOS Setup. Choose “ Integrated Peripheral “ item , user can setup “ POWER ON FUNCTION” 1. BUTTON ONLY: Power on by power button only. 2. PASSORD: Select “KB Power on Password” then enter. Key in password and save CMOS SETUP. -
Page 28: Bios Features Setup
B782/B783 BIOS Features Setup ROM PCI/ISA BIOS (2A6LFPN9) BIOS FEATURE SETUP AWARD SOFTWARE, INC Anti-Virus Protection : Enabled Video BIOS Shadow : Enabled CPU Internal Cache : Enabled C8000-CBFFF Shadow : Disabled External Cache : Enabled CC000-CFFFF Shadow : Disabled... - Page 29 B782/B783 Enabled Activate automatically when the system boots up causing a warning message to appear when anything attempts to access the boot sector or hard disk partition table. Disabled No warning message to appear when anything attempt to access the boot sector or hard disk partition table.
- Page 30 B782/B783 C,A,SCSI/ D,A,SCSI/ E,A,SCSI/ F,A,SCSI: System will first search for IDE hard disk driver ( C: D: or E: or F:) then second search floppy disk driver then SCSI hard disk driver. SCSI,A,C: System will first search SCSI hard disk driver then second search for floppy disk driver then IDE hard disk driver.
- Page 31 B782/B783 Boot Up NumLock Status The default value is On. Keypad is number keys Off: Keypad is arrow keys Boot Up System Speed It selects the default system speed - the speed that the system will run at immediately after power up.
- Page 32 B782/B783 : 12 characters per second : 15 characters per second : 20 characters per second : 24 characters per second : 30 characters per second Typematic Delay (Msec) When holding the a key, the time between the first and second character will be displayed.
- Page 33 B782/B783 Video BIOS Shadow It determines whether video BIOS will be copied to RAM, however, it is optional from chipset design. Video shadow will increase the video speed. Enabled: Video shadow is enabled Disabled: Video shadow is disabled C8000-CBFFF Shadow/DC000-DFFFF Shadow These categories determine whether optional ROM will be copied to RAM by 16K byte.
-
Page 34: Chipset Features Setup
B782/B783 Chipset Features Setup ROM PCI/ISA BIOS (2A6LFPN9) CHIPSET FEATURE SETUP AWARD AOFTWARE, INC. Bank 0/1 DRAM Timing : SDRAM 10ns Auto Detect DIMM/PCI Clk : Enabled Bank 2/3 DRAM Timing : SDRAM 10ns Spread Spectrum Modulated : Disabled Bank 4/5 DRAM Timing... -
Page 35: Power Management
B782/B783 Power Management ROM PCI/ISA BIOS (2A6LFPN9) POWER MANAGEMENT SETUP AWARD SOFTWARE, INC. ACPI function : Disabled Primary INTR : ON Power Management : User Define IRQ3 (COM 2) : Primary PM Control by APM : Yes IRQ4 (COM 1) : Primary .Video Off Option... - Page 36 B782/B783 Item Options Descriptions A. Power Management 1. Disable Global Power Management will be disabled 2. User Define Users can configure their own power management 3. Min Saving Pre-defined timer values are used such that all timers are in their MAX value 4.
- Page 37 B782/B783 4. All Modes −> Off Screen off when system is in DOZE, STANDBY or SUSPEND mode D. Video 1. Blank Screen The system BIOS will only blanks off the screen when disabling video 2. V/H SYN In addition to (1), BIOS will C+Blank also turn off the V-SYNC &...
- Page 38 B782/B783 Item Options Descriptions F. Doze Mode Disable System will never enter (*) Remark 1 DOZE mode 10 Sec Defines the continuous idle 10 Sec time before the system 20 Sec entering DOZE mode. 30 Sec 40 Min If any item defined in (J) is 1 Min enabled &...
- Page 39 B782/B783 Normally, STANDBY mode puts the system into low speed or 8, screen may be off depend on (E) Item Options Descriptions H. Suspend Mode 1. Disable System will never enter (*) Remark 1 SUSPEND mode 2. 10 Sec Defines the continuous idle...
- Page 40 B782/B783 IRQ14 (Hard Disk) IRQ15 (Reserved) * Remark 1: All items mark with (*) in this menu, will be loaded with predefined values as long as the item "Power Management" is not configured to "User Defined" These items are: Item "System Doze" , "System Standby" & "System Suspend"...
-
Page 41: Pnp / Pci Configuration Setup
B782/B783 PNP / PCI Configuration Setup ROM PCI/ISA BIOS(2A6LFPN9) PNP/PCI CONFIGURATION AWARD SOFTWARE, INC. PNP OS Installed : No CPU to PCI Write Buffer : Enabled Resources Contorlled By : Manual PCI Dynamic Bursting : Enabled Reset Configuration Data : Disabled... - Page 42 B782/B783 Item Options Descriptions B. PCI IDE 2nd Channel Enable Enable/disable 2nd channel of PCI/IDE card. Disable It includes I/O port (170H~177H) and IRQ 15 assignment C. PCI IDE IRQ Map To PCI- PCI-AUTO AUTO The BIOS will: PCI- − scan for PCI IDE devices &...
-
Page 43: Integrated Peripherals
B782/B783 INTEGRATED PERIPHERALS ROM PC/ISA BIOS(2A6LFPN9) INTEGRATED PERIPHERALS AWARD SOFTWARE, INC. OnChip IDE Channe10 : Enabled RxD , TxD Active : Hi ,Hi OnChip IDE Channe11 : Enabled Onboard Parallel Port : 378/IRQ7 IDE Prefetch Mode : Enabled Onboard Parallel Mode... -
Page 44: Load Bios Default
B782/B783 Load BIOS Default When you access "Load BIOS Default", the following message appears: Load BIOS Default (Y/N) ?N The BIOS Default values are the "worst case" default, and are the most stable values for the system. Use them if the system is performing erratically due to hardware problems. -
Page 45: Ide Hdd Auto Detection
B782/B783 IDE HDD Auto Detection This feature allows you to check all the informations on your hard disk formation. When you access "IDE HDD Auto Detection", the system executes auto detection. At the prompt, it represents all the informations on your HDD, and you are...
Need help?
Do you have a question about the B782 and is the answer not in the manual?
Questions and answers