Procomp BVD2A Manual page 38

BVD2A
Typematic Rate (Chars/Sec)
When the typematic rate is enabled, this section allows you select the rate at
which the keys are repeated.
6 6 characters per second
8 8 characters per second
1 0 1 0 characters per second
12 12 characters per second
Typematic Delay (Msec)
When the typematic rate is enabled, this section allows you select the delay
between when the key was first pressed and when the acceleration begins.
Security Option
If you have installed password protection, this item defines if the password is
required at system start up, or if it is only required when a user tries to enter the
setup utility.
OS Select For DRAM > 64 MB
This item is required if you have installed more than 64 MB of memory and
you are running the OS/2 operating system. Otherwise, leave this item at the
default Non-OS2.
HDD S.M.A.R.T Capability
S.M.A.R.T is an industry acronym for Self-monitoring, Analysis and
Reporting Technology. If the documentation of your hard disk states that
S.M.A.R.T. is supported, you can enable this item.
Report No FDD For WIN95
Set this item to Yes BIOS will report FDD to Win9x. If in standard CMOS
setup, set Drive A to none, and set this item to yes. Inside Win9x, My
Computer and File manager Disk(A:) will show Removable Disk (A:).
Video BIOS Shadow
This item allows the video BIOS to be copied to system memory for faster
performance.
Default: 6
15 15 characters per second
20 20 characters per second
Default: 250
250 250 msec
500 500 msec
750 750 msec
1000 1000 msec
Default: Setup
Default: Non-OS2
Default: Enabled
Default: No
Default: Enabled
~39~
24 24 characters per second
30 30 characters per second