Power Off Control Software - Procomp BVD2A Manual

BVD2A

1.3 POWER OFF CONTROL SOFTWARE

The motherboard design supports the software power off Control feature
through the SMI code in the BIOS under a Windows9x operating system
environment. This is an ATX form factor feature, so you should use ATX
power supply in order to enable it.
First, connect the power switch cable (provided by the ATX/AT case
Supplier) to the connector [ PWBT ] on the motherboard (Please refer to the
illustration below). In the BIOS screen of "POWER MANAGEMENT
SETUP", choose "User Defined" (or Min power saving or Max power saving)
in "POWER MANAGEMENT" and choose "Yes" in "PM Control by APM".
Note:
Refer to "Chapter 3: Award BIOS Setup" for more
information on the BIOS Setup
In Windows 9x, when using the "SHUT DOWN" function, the computer
will switch off automatically and put the PC in a suspend mode. This will be
indicated by a blinking power light indicator. To restart the system, simply
press the Power Button.
PS_BT
~5~