Procomp BVD2A Manual page 15

BVD2A
This connector is used to connect an add-in Modem Card. When
connected and enabled in the BIOS setup, this function can be used for
remotely managing a system on a network. When the Modem controller
detects activity on the Modem card, it will consequently wake up the system.
Pin
1
2
3
JP1 & JP17- Select Processor
These connectors are used to select the type of processor you are about to
use with this motherboard, this board can accept with both Intel PGA and
FCPGA, and Cyrix Joshua processors.
Pin
Joshua: 1-2
Intel: 2-3
Signal Name
5VSB
GND
LID
JP1
Short
Short
~14~
JP17
Short
Short