Power Management - Procomp BVD2A Manual

BVD2A
ACPI function
When Enabled, this function turns on several power saving measures.

Power Management

Press Enter to display the Power Management sub-menu.
This page allows you to select the type (or degree) of power saving and is
directly related to the following modes : Doze; Standby; Suspend; HDD Power
Down.
Min.Power Saving:
Max. Power Saving:
User Defined
If you would like to use Software Power-off Control function, you cannot
choose "Disabled" here, and should select "Yes" in PM Control by APM.
PM Control by APM
Windows 95 and 98 have built-in power management capabilities called APM
(advanced power management). When you enable this item, you allow the
APM routines in Windows to operate on your system.
Video Off Option
This option defines if the video is powered down if the system is put into
suspend mode.
Video Off Method
This determines the manner in which the monitor is blanked.
V/H SYNC+ Blank:
Blank Screen:
DPMS:
Minimum power management. Doze =I hr.; Standby: I
hr.; Suspend= I hr.; HDD Power Down=15min
Maximum power management only available for SL
CPU. Doze=lmin.; Standby=lmin.;Suspend=l min.;
HDD Power Down= l min
Allows you to set each mode individually. When not
disabled, each of the ranges are from 1 min. to 1 hr.,
except for HDD Power Down which ranges from 1 to
15min., and can also be disabled
This selection will cause the system to turn off the
vertical and horizontal sync. Ports and write blanks to
the video buffer.
This option only writes blanks to the video buffer.
Initial display power management signaling.
~47~
Default: Enabled
Default: User Define
Default: Yes
Default: Yes
Default: V/H SYNC+Blank