Ch4. Software Setup; Installing The Ide Bus Master Driver - Procomp BVD2A Manual

BVD2A
Chapter 4
Software Setup
The support software for this motherboard may be supplied on either a
CD-ROM, or on one or more diskettes. All the support programs are stored in
separate folders, so you can find the program you need easily. The support
software provided contains the following programs:
n
IDE Bus Master drivers for Win 95/NT.
n
PC-Cillin 98 Software.
Note: Please refer the PC-Cillin 98 installation guide for installing the
PC-Cillin 98.

4.1 Installing the IDE Bus Master Driver

After you have finished the hardware setup, you have to install the IDE Bus
Master software of the motherboard, then you can enjoy the advance
Motherboard.
Note: If your system is Win98, please skip this section. Because Windows 98
have been built-in the IDE Bus Master Driver, you don't need to install
the software again.
According the follow steps for IDE Bus Master driver installation:
1. Turn on your PC then put the "CD title" into your CD-ROM drive.
(Please make sure it's under Win98/95 mode)
2. The CD title will be auto-run. If not, please click the " start" button and
select "Run" item. Then type-> D:\setup (D is assigned your CD-ROM
Device)
~55~