Startup; Connecting The Components; Putting The Indicating Device Into Operation; Settings - Proceq Profometer 5+ Operating Instructions Manual

3

Startup

3.1

Connecting the Components

• Connect the universal probe to input A.
• If you want to use the ScanCar probe carriage,
connect it to input B.
• If you use a headset, connect it to the socket marked
with the headset symbol.
3.2 Putting the Indicating device into
Operation
• Press the ON/OFF key.
The following data is briefly displayed:
- Instrument model (model S or SCANLOG)
- Instrument serial no.
- Installed software version
- Whether automatic self-test is O.K.
- The more or less black battery symbol indicates the
battery status
Then the measuring display of the previously measured
object appears (Fig. 5.1, Fig. 5. 7 and Fig. 5.13)
When the measuring display is visible the backlight of
the LCD can be turned on and off by pressing the ↑ key
for more than 2s.
If no display appears, replace the batteries.
6 Startup
4

Settings

The indicating device has a user menu navigation.
Please follow the instructions in the display fields.
• Press the MENU key to display the main menu:
Fig. 4.1 Main menu
4.1

Bar Diameter

Setting the bar size that exists on the structure makes a
good basic accuracy of the cover readings possible. The
suggested default size is 16mm or #5. The bar diameter
setting can be done in metric units and US bar size
numbers.
Metric System
The bar size can be increased in mm. This makes it
possible to set bar diameters according to different
Modell SCANLOG only
Select menu option
Call selected option
Call measuring display of
the selected function
© 2007 Proceq SA