Units; Options; Reset Settings To Factory Default - Proceq ZRP 6030+ Instruction Manual

Units

Path: ->

Options

and selecting "Setup"
Path: ->

Reset settings to factory default

and selecting "Setup"
Path: ->
and selecting "Setup
"
Select "Units" from the menu to choose the
preferred measurement units.
Select "Options". Installed options can be
activated and deactivated for each user
profile. Only installed options are shown.
"Reset settings to factory default" will reset all
settings of the ZRP 6030+ to factory defaults.
This cannot be undone. If you are sure to
carry out the reset you need to confirm this
message.
Page 41