When lifting CLS200 from a horizontal position, support it at these three points:
①
②
③
Once vertical, CLS200 may be held by the process connection or flange:
①
Note
Unit shown is CLS200 Standard Extended Rod Version. Handling precautions apply to all
CLS200 Standard units with rods longer than 2 m (6.5 ft).
5.2.2
Location
Recommended:
• Provide a sun shield to protect the transmitter from direct heat radiation.
Precautions:
• Avoid mounting Pointek CLS200 in locations subject to strong vibrations in the vicinity,
whenever possible.
• Do not exceed the permissible ambient temperature limits (see Environmental in Pointek
CLS200/300 (Page 50) for details).
Pointek CLS200/CLS300 standard
Operating Instructions, 05/2021, A5E47827796-AA
At the process connection of flange
Midway along the rod
At the end of the rod before the sensor
At the process connection or flange
Installation
5.2 Pointek CLS200
15