Installation
5.3 Pointek CLS300
Angled mounting:
Pointek CLS300 cable version:
The cable version is designed for top mounting. The cable suspends vertically so that it
reaches into the process at the desired detection level (high or low detection alarm).
5.3.3.1
Mounting restrictions
Note
• Keep the sensor at least 50 mm (2") away from any nozzle or tank wall.
• If multiple units are used, allow at least 500 mm (20") between them, to prevent
interference.
22
Pointek CLS200/CLS300 standard
Operating Instructions, 05/2021, A5E47827796-AA