Hazardous Area Installation; Notes For Use In Hazardous Locations - Siemens Pointek CLS200 Operating Instructions Manual

Hazardous area installation

C.1

Notes for use in hazardous locations

Use of this manual
For use and assembly, refer to the instructions in this manual. It contains all instructions
required by ATEX Directive 2014/34/EU, Annex II, 1/0/6 and Ordinance INMETRO n°179/2010.
General notes
Refer to the appropriate certificate for application in specific hazardous environments. The
equipment has not been assessed as a safety related device (as referred to by Directive
2014/34/EU Annex II, clause 1.5).
The certificate numbers have an "X" suffix, which indicates that specific condition of use
apply. Those installing or inspecting this equipment must have access to the certificates.
Qualifications of personnel / servicing / repair
• Installation and inspection of this equipment shall be carried out by suitably trained
personnel in accordance with the applicable code of practice (ABNT NBR IEC/EN 60079-14
and ABNT/NBR IEC/EN 60079-17 in Europe).
• Repair of this equipment shall be carried out by suitably trained personnel in accordance
with the applicable code of practice (e.g. ABNT NBR IEC/EN 60079-19 within Europe).
Repair of flameproof path is not intended.
• Components to be incorporated into or used as replacements in the equipment shall be
fitted by suitably trained personnel in accordance with the manufacturer's documentation.
• In potentially explosive atmospheres open the enclosure only when the device is not
energized. Turn off power before servicing any device (the transmitter is in operation
when the power supply is switched on). In case of removing the unit from vessel, take
care of process pressure and material passing the opening.
ATEX list of certificates / list of standards
Certificate numbers: See EU - Declaration of Conformity for the list of standards valid for ATEX
certificates.
ATEX year of manufacturing
Year of
manufac-
ture
Marking
code
68
2018 2019 2020 2021
K L M N
2022 2023 2024 2025
P R S T
Operating Instructions, 05/2021, A5E47827796-AA
C
2026 2027 2029
U W X
Pointek CLS200/CLS300 standard