The Manual - Siemens Pointek CLS200 Operating Instructions Manual

The manual

Note
Please follow the installation and operating procedures for a quick, trouble-free installation
and to ensure the maximum accuracy and reliability of your Pointek CLS200/ 300. This
manual applies to the Pointek CLS200/300 Standard model only.
Pointek CLS200/300 is available in two models, Standard and Digital. For information on the
CLS200/300 Digital model, please see manual 7ML19985JJ02.
Note
This manual applies to CLS200 Standard devices manufactured after July 2010 and CLS300
Standard devices manufactured after January 2011. Units manufactured prior to these dates
will use Operating Instructions 7ML19985JH01.
This manual will help you set up your Pointek CLS200/300 Standard for optimum
performance.
Sections in this manual are designated as follows:
• Pointek CLS200/300 Standard (Page 10) - an introduction to Pointek CLS200/300 Standard
model and to the manual
• Technical data (Page 50)
• Pointek CLS200 (Page 14)
• Installation: Pointek CLS300 Standard (Page 21)
• Wiring (Page 27)
• Pointek CLS200 (Page 36)
• Pointek CLS300 (Page 42)
• Technical reference (Page 56)
• Maintenance and repairs (Page 67)
• Hazardous area installation (Page 68)
• Dimensions (Page 77)
• Shortening the cable (Page 101)
• Product documentation and support (Page 108)
• Application (Page 106)
For other Siemens Milltronics level measurement manuals, go to: www.siemens.com/level
(http://www.siemens.com/level) and look under Level Measurement.
Pointek CLS200/CLS300 standard
Operating Instructions, 05/2021, A5E47827796-AA
2
7