Controls And Indicators; Control Panel; External Displays And Switches (Keys) - B&R PLC PP15 Reference Manual

Fig. 3: Controls and indicators
Fig. 4: Option/Error entry position for
access
B&R PLC PP15 for use with the, d&b Remote network, Reference manual (1.1 EN)
2.2

Controls and indicators

2.2.1

Control panel

LC Display [1]
Acts as a user interface and displays all errors present.
Function keys [2]
Toggle between different menu pages. The user is guided by the
display.
Up/Down keys [3]
Select menu items and/or browse through the error message list.
Enter key [4]
Confirms menu items and/or requests detailed cause of error.
Notes: To access the respective options or error entries move
them to the first line behind the cursor using the Up/Down
keys.
The "PWR/Comm. Loss" error message cannot be detailed.
Preset keys with LED display [5]
Recalls the amplifier settings (Preset) assigned to a particular key via the
d&b Remote Network (CAN-Bus).
The following functions can be set using the d&b configuration tool:
The LED related to the selected key lights up. If there is no preset
–
assigned to the key, the LED key does not light up.
In case of an alarm (alarm contact activated) all LEDs flash.
–
2.2.2

External displays and switches (keys)

It is possible to extend the functional range of the PP15 by external
wiring. Refer to section 2.3.3 Digital inputs (DI) on page 10 and section
2.3.4 Digital outputs (DO) on page 11.
Important! If no external wiring is required, configure the
"Alarm contact" (digital input DI 16) as high-active N/O
contact (normally open contact).
Page 7 of 16