Programmable Function Keys - NEC SL1000 Features And Specifications Manual

ISSUE 1.0
Description
Each multiline terminal has Programmable Function Keys. Programmable Function Keys simplify
placing calls, answering calls and using certain features. You can customize the function of a multiline
terminal programmable keys from each multiline terminal. Depending on your telephone style, you can
have up to 24 Programmable Function keys.
Conditions
• When a key is programmed using service code 852 , that key cannot be programmed with a function
using the 851 code until the key is undefined (000). For example with a Park Key programmed by
dialing 852 + 04 must be undefined by dialing 000 before it can be programmed as a Voice Over
*
key by dialing 851 + 48.
• Using Program 92-01 to copy a multiline terminal Programmable Function Keys, copies all the keys
whether or not they exist on the telephone to which the programming is being copied. This may
cause confusion when trying to define a key which is already defined but which does not exist on the
telephone (displays as DUPLICATE DATA). It is recommend to either clear these non-existent keys
or to copy only from an extension which has the same or fewer number of keys than the extension to
which the programming is being copied.
• Speed Dialing and One-Touch Calling also offer quick access to calls and features.
• Programming a 60-button console requires separate programming.
• Below shows example of function key and LCD display indication (Program 15-07-01 Function Key
Assignment).
FunctionNum-
ber
00 None
01 DSS/One-Touch
02 Microphone Key (ON/OFF)
03 DND Key
04 BGM (ON/OFF)
05 Headset
07 Conference Key
10 Call Forward - Immediate
11 Call Forward - Busy
12 Call Forward - No Answer
13 Call Forward - Busy/No Answer
14 Call Forward - Both Ring
15 Follow Me
If a key is programmed as a DSS/One-Touch key for a station that is set for Call Forward All Calls or Do Not
Disturb, the DSS/One-Touch key flashes.
Refer to the SL1000 Programming Manual for a complete list of Function Numbers.
• One-Touch keys programmed for Park Hold Service Code cannot be used to park calls without using
Hold or Transfer.
• Pauses can be entered in the dial string of a DSS/One Touch button. The pause is entered as P in
the dial string and causes the system to wait three seconds before sending the rest of the digits that
follow the P (pause). Multiple pauses can be entered.
• The @ can be entered in the dial string of a DSS/One Touch button. The @ only applies to ISDN and
Features and Specifications Manual

Programmable Function Keys

Function
[All Blank]
DSS
MIC KEY
DND KEY
BGM
HEADSET
CONFERENCE
FORWARD
TRANSFER-BUSY
TRANSFER-NO ANS
TRANSFER-B/N
FWD-DUAL RING
FOLLOW ME
SL1000
Display
1-411
P