NEC SL1000 Features And Specifications Manual page 574

SL1000
To program a key, press Speaker, dial 851
For this Use this key...
feature...
Name Code: 55
Storing Operation: Press key +
ext ## + name + Hold
Night Code: 09 + mode (1~4 or
Service 1~8)
Operation: Press key
Off-Hook Code: 33
Signaling Operation: Call ext. and
receive busy + Press key
Paging, Code: 19 + zone (1~3)
External Operation: Press Key
Code: 20
Operation: Press key
Paging, Code: 21 + zone(1~8,
Internal 1~9 or 01~32)
Operation: Press key
Code: 22
Operation: Press key
Park Code: 04 + orbit (1~9 or
*
01~64)
Operation: Place or
answer call + Press key
Repeat Code: 29
Redial Operation: Place call and
press key
Room Code: 39
Monitor Operation: Press key at
destination & source + ext
Save Code: 30
Number Operation:
Dialed + pswd
(0000) + place outside call
Save: Place call + Press
key
Redial: Line or Speaker
key + Press key
Secretary Code: 41 + sec. ext
Call Operation: Press key
(Buzzer)
Secretary Code: 42 + boss ext
Call Pickup Operation: Press key
Selectable Code: 18
Display Operation: Press key +
Messaging additional data if needed
Serial Call Code: 43
Operation: Trk call + Hold
+ ext + Press key
Step Call Code: 36
Operation: Press key
Transfer Code: 06
Operation: Establish call
+ Hold + Ext + Press key
2-16
(for 2-digit codes) or 852 (for 3-digit codes), press the key and enter
the code (e.g., 48 for Voice Over).
When you ... Key Lamp Status
Enter a name for the
extension to be
displayed on tele-
phones.
Activate the On red when acti-
Day/Night Mode.
Signal a busy exten-
sion.
Make an external On red when acti-
zone page.
Make an external All On red when acti-
Call page.
Broadcast to an On red when acti-
Internal Paging Zone.
Broadcast to all On red when acti-
Internal Paging
zones.
Place a call into or Fast flash when orbit
retrieve a call from a is busy (green at
Park Orbit. originator, red at
Activate Repeat Fast Flash while
Redial while on a call. system waits to redial
Activate Room Dest. Fast Flash red,
Monitor. Source Hold Flash
Save, redial or check
saved number.
Call your secretary On red at source
(using the buzzer). Fast Flash red at
destination
As a secretary pick On red when acti-
up a call ringing your
boss's extension.
Set up Call Flashes red when
Forwarding
Off-Premise, Select-
able Display
Messaging, VRS Park
and Page and VRS
Personal Greeting.
Place a Serial Call to
a co-worker.
Step through a
department group.
Transfer a call.
Also See Srvc
Code
None 800
818
vated + 0
None
*
803
vated + zone
803
vated + 0
801
vated + zone
801
vated + 0 or 00
<Park>
#6
<Pickup>
others) 6
*
-
-
red
None -
-
-
vated
-
activated
None -
None 4
None -
ISSUE 1.0
Note
Codes Tables