Table 2-5 Function Key Codes By Number - NEC SL1000 Features And Specifications Manual

ISSUE 1.0
To program a key, press Speaker, dial 851
For this Use this key...
feature...
Trunk Group Code:
*
Routing Operation: Press key
Trunk Code: 02 + TRK group
*
Groups (1~9 or 001~126 )
Operation: Press key
Trunk Code: 35
Queuing Operation: Hear busy
tone for Trk + Press key
Voice Mail Code: 83 + code (0~4)
Operation: Press key
Code: 77 + extension or
Message Center number
Operation: Press key
+ pswd
(0000) + place outside call
Code: 78 + 0
Operation: Set up call +
Press key
Function Key Codes by Number
To program a key, press Speaker, dial 851
Use this key... For this feature...
Code: 01 + dest. Direct Station Selec-
ext. or outside tel tion,Hotline,
# + Hold One-Touch Calling
Operation: Press
key
Code: 02 Microphone Cutoff
Operation: Set up
call + Press key
Code: 03 Do Not Disturb
Operation: Press
key
Code: 04 Background Music
Operation: Press
key
Code: 05 Headset Operation
Operation: Press
key
Code: 06 Transfer
Operation: Estab-
lish call + Hold +
Ext + Press key
Code: 07 Conference
Operation: Set up
call + Press key +
set up call to add +
Press key twice
Code: 08 Incoming Caller ID
Operation: Press List
key
Features and Specifications Manual
(for 2-digit codes) or 852 (for 3-digit codes), press the key and enter
the code (e.g., 48 for Voice Over).
When you ...
05 Access a trunk using
Trunk Group Routing.
Use a trunk group key
to access a Trunk
Group.
Camp On or Queue
for a trunk.
Use Voice Mail
Service.
Call Voice Mail or
leave a message.
Use Voice Mail
Record.

Table 2-5 Function Key Codes by Number

(for 2-digit codes) or 852 (for 3-digit codes), press the key and enter
the code (e.g., 48 for Voice Over).
When you ...
Call an extension or
outside number
using a DSS key.
Use Microphone
Cutoff.
Activate DND.
Turn BGM on or off.
Enable or disable
Headset Operation.
Transfer a call.
Set up a conference
or a Meet Me
Conference.
List incoming caller
ID to extension.
Key Lamp Status Also See Srvc
On red when active
On red when active
On red while camped
on
Flashes slowly when
monitoring
Flashes green on
your key for your
messages or flashes
red for the Message
Center
Slow Flash red when
active
Key Lamp Status Also see Srvc
Code
Off = extension idle
On = extension busy
Flashing = DND
On red when acti-
vated
On red when acti-
vated
On red when acti-
vated
On red when acti-
vated
None
On red during setup
Flashing when new
log created On in call
log
SL1000
Note
Code
9
804
-
-
8
*
5
-
Note
847
-
-
825
-
-
826
-
2-17