Line Keys/Programmable Function Keys - NEC ELECTRA ELITE IPK II User Manual

Use this
keypad
digit . . .
Enter characters:
*
# # = Accepts an entry (only required if two letters on the same key are
needed - ex: TOM). Pressing # again = Space.
Conf Clears the character entry one character at a time (used when entering
the Name).
Exit Clears all the entries from the point of the flashing cursor and to the right
(used when entering the Number, this clears both the number and name).
8. Press Hold.
9. Press the Speaker key to hang up.

LINE KEYS/PROGRAMMABLE FUNCTION KEYS

The following functions can be assigned to Line Keys if allowed by Class
of Service.
To Program a Line key as a Programmable Function Key:
1. Press the Speaker key.
2. Dial Service Code 751.
3. Press the Line Key to be programmed.
4. Dial the code for the desired feature plus additional data if
required.
5. Press Speaker to hang up.
Note 1:
Note 2:
Key for Entering Names
Service Code 00 will erase the function from the key.
In some cases, the Hold key needs to be pressed before
pressing the Speaker key.
When you want to. . .
37