NEC SL1000 Features And Specifications Manual page 26

SL1000
2. Dial your Account Code (1~16 digits, using 0~9 and #).
If Account Codes are hidden, each digit you dial shows an
3. Dial .
*
- OR -
Press your Account Code key (Program 15-07 or SC 851 : code 50).
To enter an Account Code before dialing the outside number:
If your system has Forced or Verified Account Codes, you may use this procedure instead of letting the
system prompt you for your Account Code. You may also use this procedure if your system has
Optional Account Codes.
A
If your system has Verified Account Codes enabled, be sure to choose a code programmed into your
Verified Account Code list.
1. Access trunk for outside call.
Press a line key or dial a code to access a trunk. Refer to
more information.
2. Dial .
*
- OR -
Press your Account Code key (Program 15-07 or SC 851 : code 50).
3. Dial your Account Code (1~16 digits, using 0~9 and #).
If you make an incorrect entry, your system may automatically alert the operator. If Account Codes are
hidden, each digit you dial shows an
4. Dial .
*
- OR -
Press your Account Code key (Program 15-07 or SC 851 : code 50).
5. Dial the number you want to call.
To enter an Account Code for an incoming call:
This procedure is not available for single line telephones.
1. Answer incoming call.
If Account Codes for Incoming Calls is disabled, the following steps dial digits out to the connected trunk.
2. Dial .
*
3. Enter the Account Code.
You can enter any code of the proper length. Incoming Account Codes cannot be Forced or Verified.
4. Dial .
*
To enter an Account Code at a single line telephone:
1. Access trunk for outside call.
You can access a trunk by dialing a code. Refer to
information.
2. Dial .
*
3. Enter Account Code (1~16 digits).
4. Dial .
*
5. Dial number you want to call.
1-18
on the telephone display.
*
Central Office Calls, Placing on page 1-106
on the telephone display.
*
Central Office Calls, Placing on page 1-106
ISSUE 1.0
for
for more
Account Code Entry