NEC SL1000 Features And Specifications Manual page 79

ISSUE 1.0
Trunk-to-Trunk Forwarding - DID (3) Trunk Forwarding Using DID Translation Table
Refer to Direct Inward Dialing (DID) on page 1-166
Program Num-
ber
22-11-05 DID Translation Table Number Conversion - Transfer Destination
Number 1
22-11-06 DID Translation Table Number Conversion - Transfer Destination
Number 2
Operation
To activate Call Forwarding Off-Premise non-split:
1. At a multiline terminal, press Speaker.
- OR -
At a single line telephone, lift the handset.
2. Dial the Call Forwarding Service Code.
- OR -
At a multiline terminal only, press the Call Forwarding Programmable Function keys (Program
15-07-01, Program 15-07-10 ~ Program 15-07-15 or SC 851 Key Code 10~15).
3. Dial 1 (Set).
4. Dial the Trunk Access Code (default: 9) + Number (9 + 2142622000).
Trunk access codes are 9 (ARS/Trunk Group Routing), 804 + Line Group (1~9, 01~99 or 001~100) or #9
+ Line number (e.g., 05 or 005 for line 5).
Your DND or Call Forwarding (Device) Programmable Function key flashes.
To cancel Call Forwarding Off-Premise non-split:
1. At a multiline terminal, press Speaker.
- OR -
At a single line telephone, lift the handset.
2. Dial the Call Forward Access Code (default not assigned).
3. Dial 0 (Cancel).
To activate Call Forwarding Off-Premise Split:
1. At a multiline terminal, press Speaker.
- OR -
At a single line telephone, lift the handset.
2. Dial the Call Forwarding Service Code.
3. Dial 1 (Set).
4. Dial 1 (Internal) or 0 (External).
5. Dial Trunk Access Code (default: 9) + number (9 + 2142622000).
Trunk access codes are 9 (ARS/Trunk Group Routing), 804 + Line Group (1~9, 01~99 or 001~100) or #9
+ Line number (e.g., 05 or 005 for line 5).
Your DND or Call Forwarding (Device) Programmable Function key flashes.
Features and Specifications Manual
for additional DID programming.
Program Name
SL1000
Default
0
1-71
C