NEC SL1000 Features And Specifications Manual page 358

SL1000
Program Number
80-03-03
Operation
With any feature, if the Mobile Extension user presses
a second time or the timeout of the inter-digit timer returns the call to conversation mode.
Using Analog Lines with the Mobile Extension
M
Analog lines can be used for integration with the Mobile Extension using either DILs or VRS Auto
Attendant to access the Mobile Extension Proxy Port. However, it must be noted that the
code must be used prior to terminating any call (e.g., transfer, hang up etc.) as analog trunks do not
provide Disconnect Supervision.
Placing an Intercom Call to a Mobile Extension
1. Lift the handset or press SPK.
2. Dial the extension number assigned to the Mobile Extension.
If the Mobile Extension is turned off, incoming calls hear a message indicating the user is not
available. The setting in the DTMF Confirmation programming (Program 15-22-02) determines
how the call is handled.
Program 15-22-02 set to 0 or 1 (DTMF Confirmation Required):
The caller is retrieved by the SL1000 and follows the no-answer programming (ring another exten-
sions, forward to SL1000 voice mail, etc.)
Program 15-22-02 set to 2 (No DTMF Confirmation Required):
The caller is forwarded to the external extension voice mail, if available.
Outside Party Dialing the Mobile Extension
1. Dial the DID or DIL telephone number for the Mobile Extension.
2. System programming (DID=22-11-01 or DIL=22-07-01) must be defined.
If the Mobile Extension is turned off, incoming callers hear a message indicating the user is not
available. The setting in the DTMF Confirmation programming (Program 15-22-02) determines
how the call is handled.
Program 15-22-02 set to 0 or 1 (DTMF Confirmation Required):
The caller is retrieved by the SL1000 and follows the no-answer programming (ring another exten-
sion, forward to SL1000 voice mail, etc.)
Program 15-22-02 set to 2 (No DTMF Confirmation Required):
The caller is forwarded to the external extension voice mail, if available.
Placing a Call from the Mobile Extension
1. Dial the DID or DIL telephone number for the Mobile Extension.
If the Caller ID of the Mobile Extension matches the Speed Dial bin entry (Program 13-04 and
15-22), internal dial tone is heard by the Mobile Extension user.
1-350
Program Name
DTMF Tone Receiver Setup - Min. Detect Level
Default
Type 1 = 10 (-20dBm)
Type 2 = 15 (-25dBm)
Type 3 = 10 (-20dBm)
Type 4 = 10 (-20dBm)
Type 5 = 10 (-20dBm)
, an existing call is placed in hold. Pressing
*
ISSUE 1.0
*
0 Hang Up
*
Mobile Extension