NEC SL1000 Features And Specifications Manual page 80

SL1000
To cancel Call Forwarding Off-Premise Split:
1. At the multiline terminal, press Speaker.
- OR -
2. At a single line telephone, lift the handset.
3. Dial the Call Forward Access Code (default not assigned).
4. Dial 0 (Cancel).
If Internal and External are set both are canceled.
Your DND or Call Forwarding (Device) Programmable Function key flashes.
C
Off-Premise Call Forwarding for Door Boxes
These operations are performed at the Door Box Ringing Extension only.
To activate Call Forwarding for a Door Box:
This option only works for ISDN PRI or BRI Trunks.
1. At the multiline terminal, press Speaker + dial SC 822 .
- OR -
At the multiline terminal only, press Call Forward (Device) key (Program 15-07-01 or SC 851 ,
code 54).
- OR -
At the single line telephone, lift the handset + dial 822 .
2. Dial the Door Box number (1~8).
3. Dial the Speed Dialing number where the calls should be forwarded.
4. Press Speaker (or hang up at the single line telephone) to hang up.
To cancel Call Forwarding Off-Premise for a Door Box:
1. At the multiline terminal, press Speaker + dial SC 822 .
- OR -
At the multiline terminal only, press Call Forward (Device) key (Program 15-07-01 or SC 851 ,
code 54).
- OR -
At the single line telephone, lift the handset + dial 822 .
2. Dial 0 (Cancel).
Trunk-to-Trunk Forwarding
Set the Destination and Forward the Line:
1. Lift the handset.
2. Dial 835 .
3. Dial trunk port number (001~126) to be defined.
4. Select the mode (1~8) to be defined.
5. Enter the telephone number, which is the destination of the forwarded trunk.
The number is stored in the Speed Dial bin number assigned in Program 24-04-01. This entry overwrites
anyexisting number defined in the bin.
6. Press Hold to accept the entry.
7. Repeat from Step 3 to define another mode entry or press Speaker to hang up.
Cancel the Line Forwarding:
1-72
ISSUE 1.0
Call Forwarding, Off-Premise