NEC SL1000 Features And Specifications Manual page 313

ISSUE 1.0
Programming Flowchart for ISDN-PRI - Answering Calls
In 10-03-03, enter
In 10-03-06, determine the length of cable used to connect from the CSU to
In 10-03-08, enter
'0'.
In 21-01-03, enter the
interval for the trunk
interdigit timer.
In 20-19-04, set the
timer to '0'.
Features and Specifications Manual
Start
In 10-03-01, determine the mode of
the IP4WW-1PRIU-C1(0=not set, 1=T-Bus)
Is the CRC
Multi-Frame
No
(CRC4)
'0'.
used?
In 10-03-04, select the Layer 3 timer type (1-5). The timer value is
set up in Program 81-06 (T-Bus)
the IP4WW-1PRIU-C1
(0=0-40m, 1=40-81m, 2=81-122m, 3=122-162m, 4=162-200m).
Is the Dial
Sending Mode
Enblock Enblock or
Overlap
Sending?
In 14-05-01, assign PRI lines to
trunk groups (determines
available channels for PRI lines).
Is the amount of time the
system waits before placing
No
the call in a talk state
sufficient?
Yes
Do you wish to have
the Caller ID
No
Name displayed for
incoming calls?
Go To
A
In 10-03-03, enter
Yes
'1'.
In 10-03-08, enter
overlap
'1'.
In 10-03-09, selent either
Keypad Facility (0) or
Called Party Number (1) for
the dial information element.
20-19-04, set the
timer to at least '10'
Yes
seconds.
SL1000
I
1-305