Table of Contents
Advertisement
External Buttons
Your SR400ac gateway provides push-button controls on its exterior for critical features. These buttons provide a convenient means
to trigger WPS mode, toggle the Wi-Fi radio on and off, or reset the gateway. The button functions are described below.
WPS Button (5 GHz Band)
Wi-Fi Protected Setup™ (WPS) is a standard means for creating secure connections between your gateway and various wireless client
devices. It is designed to simplify the pairing process between devices. This button is located on the left side of your SR400ac
gateway.
When you press this button for 1-3 seconds, the WPS LED starts to flash. If no client pairs with your gateway after 2 minutes, the WPS
LED turns off.
When the gateway pairs successfully with a client, the WPS LED glows solid for 5 minutes and then turns off.
WiFi Button (2.4 GHz Band)
The
WiFi
button toggles the Wi-Fi radio on and off. This button is located on the left side of your SR400ac gateway. Look at the WLAN
LED indicator to determine the current state of the Wi-Fi radio.
To activate the radio, press and hold the
turns on. The Wi-Fi radio is now on.
To deactivate the radio, press and hold the
LED turns off. The Wi-Fi radio is now off.
On/Off Button
The
On/Off
button turns the device on and off. This button is located on the left side of your gateway.
Reset Button
The Reset button returns your gateway to its default settings.
This button is in a small circular hole in the back of the gateway case with the actual button mounted behind the surface. This
style of push button prevents the gateway from being inadvertently reset during handling.
Warning:
Do not press the
Reset
If you want to restore the default settings, insert a thin wire (such as a paper clip) into the hole, press the
second, and then release the button. The gateway reboots and returns to the current defaults.
To return the gateway to factory default settings, press the
and returns to the default settings applied in the factory. This process may take a few minutes.
SmartRG Inc., an ADTRAN Compny Proprietary and Confidential. All Right Reserved. © 2019
WiFi
button for 3-5 seconds then release. Expect a 1-3 second delay before the WLAN LED
WiFi
button for 3-5 seconds then release. Expect a 1-3 second delay before the WLAN
button unless you want to clear the current settings.
Reset
button until the LEDs flash red and orange. The gateway reboots
Reset
button for 1
6
Hide quick links:
Advertisement
Table of Contents
