Functional Enhancement Of The Recorder - YOKOGAWA Vigilantplant mR10000 User Manual

Trademarks

Functional Enhancement of the Recorder

Version Suffix Code
–
1.11
–
–
/C3
/C7
-2
1.21
/CC1
–
1.31
/BT1
–
ii
• All the brands or names of Yokogawa Electric's products used in this manual are
either trademarks or registered trademarks of Yokogawa Electric Corporation.
• Microsoft, MS-DOS, Windows, Windows NT, and Windows XP are either registered
trademarks or trademarks of Microsoft Corporation in the United States and/or other
countries.
• Adobe, Acrobat, and PostScript are trademarks of Adobe Systems incorporated.
• For purposes of this manual, the TM and ® symbols do not accompany their
respective trademark names or registered trademark names.
• Other company and product names are trademarks or registered trademarks of their
respective holders.
The functions of the recorder have been added or changed as shown in the figure below.
You can check the system version on the system display. For details, see the µ R10000
User's Manual (IM 04P01B01-01E) or the µ R20000 User's Manual (IM 04P02B01-01E) .
Added or Modified Functions
(Changed) Expanded the selectable range of alarm values
during linear scaling (including 1-5V and SQRT)
to –5% to 105% of the scale.
(Changed) The procedure to set the start/end date and time of
Daylight Saving Time (DST) has been changed.
The TD command can be used on the µR20000 and
the µR10000 with system version 1.11.
The SS command can be used on the µR10000
with system version 1.02 or earlier.
(Added) The print/display format of the date can be changed.
(Changed) Modbus slave protocol can be used.
Two-wire system.
(Changed) Users with the same user name cannot be registered.
Common to µR10000 and µR20000
(Added) Language support (German and French).
(Added) Calibration Correction.
(Added) Customized menu.
(Added) Header printout.
(Added) Hold registers 40301 to 40348 (floating type register
for communication input data) for Modbus
communication.
µR10000 only
Reference
Sec. 4.4: SA command
Sec. 4.4: TD command
Sec. 4.5: XN command
Sec. 4.5: YS command
Sec. 3.2
Sec. 2.5
Sec. 4.5: UL command
Sec. 4.4: VL commands
Sec. 4.5: UQ and UF commands
Sec. 4.5: UG and UH commands
Sec. 4.4: VH, VC, VP, VA,
VM, and VD commands
Sec. 4.5: UE and XR commands
Sec. 3.4
IM 04P01B01-17E