Basic Setting Commands - YOKOGAWA Vigilantplant mR10000 User Manual

4.2 A List of Commands

Basic Setting Commands

Command Function
Name
Sets alarm related settings.
XA
Sets the A/D integral time.
XI
Sets the burnout detection.
XB
XJ Sets the RJC.
UC Changes the dot color (dot model).
UO Sets the pen offset compensation (pen model).
UP Sets the items to be printed.
UR Sets the periodic printout interval.
UM Sets the types of report data that are output to the
periodic printout.
UB Sets the display mode of the bar graph.
UI Sets whether to use moving average (dot model).
Sets whether to use the input filter (pen model).
UJ
Sets whether to use of partial expanded recording.
UK
Selects the display/printout language.
UL
XN Selects the date format.
XT Selects the temperature unit.
UF Sets whether to use the extended functions.
UT Selects the time printout format.
XR Sets the remote control input (/R1 option).
YS Sets the RS-422A/485 interface (/C3 option).
Sets the TLOG timer (/M1 option).
XQ
Changes the assignment of channels to the recording pen Basic Setting mode
UN
(pen model, /M1 option).
US Sets the computation error procedure (/M1 option).
YB Sets the host name and domain name (/C7 option).
YA Sets the IP address (/C7 option).
YN Sets the DNS (/C7 option).
YD Sets whether to use the login function via communication Basic Setting mode
(/C7 option).
YQ Sets the communication timeout (/C7 option)
YK Sets keepalive (/C7 option).
UQ Sets the calibration correction mode and the number
of set points (/CC1 option).
Sets the record position.
UA
Sets the Setting mode menu selection.
UG
UH Sets the FUNC key menu selection.
UE Selects enable/disable for Start printout/End printout
and message format (/BT1 option).
YE Exits from Basic Setting mode.
XE Exits from Basic Setting mode.
4-4
Note
• The settings that are returned in response to a query in the basic setting mode will contain the
new settings even if they are not saved.
• In order to activate the settings that are changed using the basic setting commands, the
settings must be saved using the YE or XE command.
• If the settings are saved with the XE command, communication is not dropped. If saved with
the XE command, the settings that are changed using the YS/YB/YA/YN/YD/YQ/YK command
are activated after power-cycling the recorder.
• When the YE command is executed, communication is dropped. The response to the YE
command is not returned.
• The following settings cannot be changed.
Key lock, enabling/disabling of the customized menu function, user registration for Ethernet
communication.
Execution Mode Administrator User Page
Basic Setting mode Yes
Basic Setting mode Yes
Basic Setting mode Yes
Basic Setting mode Yes
Basic Setting mode Yes
Basic Setting mode Yes
Basic Setting mode Yes
Basic Setting mode Yes
Basic Setting mode Yes
Basic Setting mode Yes
Basic Setting mode Yes
Basic Setting mode Yes
Basic Setting mode Yes
Basic Setting mode Yes
Basic Setting mode Yes
Basic Setting mode Yes
Basic Setting mode Yes
Basic Setting mode Yes
Basic Setting mode Yes
Basic Setting mode Yes
Basic Setting mode Yes
Yes
Basic Setting mode Yes
Basic Setting mode Yes
Basic Setting mode Yes
Basic Setting mode Yes
Yes
Basic Setting mode Yes
Basic Setting mode Yes
Basic Setting mode Yes
Basic Setting mode Yes
Basic Setting mode Yes
Basic Setting mode Yes
Basic Setting mode Yes
Basic Setting mode Yes
Basic Setting mode Yes
Yes: Command usable
No: Command not usable
No 4-20
No 4-21
No 4-21
No 4-21
No 4-21
No 4-22
No 4-22
No 4-22
No 4-22
No 4-23
No 4-23
No 4-23
No 4-23
No 4-23
No 4-23
No 4-23
No 4-23
No 4-24
No 4-24
No 4-24
No 4-24
No 4-25
No 4-25
No 4-25
No 4-25
No 4-25
No 4-26
No 4-26
No 4-26
No 4-26
No 4-26
No 4-27
No 4-27
No 4-27
No 4-27
No 4-27
IM 04P01B01-17E