Control Commands; Output Commands; Rs-422A/485 Dedicated Commands - YOKOGAWA Vigilantplant mR10000 User Manual

Control Commands

Key Command Function
Name
- DS Switches the execution mode.
RCD PS Starts/Stops recording.
DISP UD Switches the screen/switches the channel.
FUNC AK Executes alarm acknowledge (AlarmACK)
FUNC TL Starts/stops/resets computation (/M1 option).
FUNC MP Starts/Stops manual print.
FUNC LS Starts/Stops the list (setting information) printout.
FUNC SU Starts/Stops the setup list (basic setting information)
printout.
FUNC MS Executes the message printout.
FUNC AC Clears the alarm printout buffer.
FUNC MC Clears the message printout buffer.
FUNC VG Resets the report data of the periodic printout.
- YC Initializes the settings.
- UY Stops the record position adjustment.

Output Commands

Command Command Function
Type Name
Control
BO Sets the byte output order.
CS Sets the check sum
(usable only during serial communications).
IF Sets the status filter
Disconnects an Ethernet connection
CC
(usable only during Ethernet communications)
Setup, measurement, and computation data output
FE Outputs decimal point position, unit information,
and setup data.
FD Outputs the most recent measured/computed data.
FY Outputs the statistical computation results.
Outputs FIFO data.
FF
IS Outputs status information.
FU Outputs user information.

RS-422A/485 Dedicated Commands

Command Function
Name
Esc O Opens the instrument.
Closes the instrument.
Esc C
IM 04P01B01-17E
4.2 A List of Commands
Execution Mode Administrator User Page
All modes Yes
Run mode Yes
Run mode Yes
Run mode Yes
Run mode Yes
Run mode Yes
Run mode Yes
Run mode Yes
Run mode Yes
Run mode Yes
Run mode Yes
Run mode Yes
Basic Setting mode Yes
Basic Setting mode Yes
Yes: Command usable
No: Command not usable
Execution Mode Administrator User Page
All modes Yes
All modes Yes
All modes Yes
All modes Yes
All modes Yes
Run mode Yes
Run mode Yes
Run mode Yes
All modes Yes
All modes Yes
Yes: Command usable
No: Command not usable
Execution Mode Administrator User Page
All modes Yes
All modes Yes
Yes: Command usable
No: Command not usable
No 4-28
No 4-28
No 4-28
No 4-28
No 4-28
No 4-28
No 4-28
No 4-28
4
No 4-28
No 4-28
No 4-29
No 4-29
No 4-29
No 4-29
Yes 4-29
Yes 4-29
Yes 4-29
Yes 4-30
Yes 4-30
Yes 4-30
Yes 4-30
Yes 4-30
Yes 4-31
Yes 4-31
Yes 4-31
Yes 4-31
4-5