Safety Instructions - Bresser T-Rex Instruction Manual

Safety Instructions

NOTE!
Familiarize yourself with this manual and read all the instructions it contains
before you start setting up and operating the machine. Failure to heed warnings
and instructions may result in personal injury, fire, and damage to the machine
or other property.
STRICTLY FOLLOW ALL SAFETY AND OTHER INSTRUCTIONS IN THIS MANUAL
AT ALL TIMES!
Safety in the working environment
① Keep the workplace clean!
② Do not operate the 3D Printer if flammable liquids, gases or dust are present.
③ Keep children and untrained persons away from the 3D printer.
Power supply safety
① Operate the 3D Printer only from a grounded power outlet. Do not modify
the power plug of the 3D Printer.
② Do not operate the 3D Printer in a hazy or humid environment. Do not
expose the 3D printer to direct sunlight.
③ Do not use the power cord for any purpose other than its intended use.
④ Do not operate the machine during a thunderstorm.
⑤ To prevent accidents, disconnect the power supply if you are not going to
use the machine for a long period of time.
Safety of persons
① Do not touch the nozzle or printing plate during printing.
② Do not touch the nozzle after printing is finished.
www.bresser.de
5