Bresser T-Rex Instruction Manual page 53

Repair Models:
Supports:
6.2.7 View Menu
The View Menu contains the following options.
Home View:
Top View:
Right View:
Show Steep Overhang: Highlights in red those portions of the model that
www.bresser.de
Click Edit > Repair Models to correct any errors in the
selected model(s).
Click Edit > Supports to enter Support Edit mode.
Sets the camera to the default position.
Sets the camera to look directly down onto the build
area. Bottom View: Sets the camera to look directly up
towards the build area. Left View: Sets the camera to
look at the build area from the left.
Sets the camera to look at the build area from the right.
Front View: Sets the camera to look at the build area
from the front. Back View: Sets the camera to look at
the build area from the rear. Show Model Outline: Puts
a yellow outline around the model.
require supports.
53