Bresser T-Rex Instruction Manual page 61

③ Reboot the printer and wait 4-5 seconds until the update progress bar is
displayed. When the update is finished, it will return to the Top Menu.
④ Touch the Tool button, then touch About to check that the version is correct.
6.2.12 Printing
There are two basic modes of printing: single extrusion and dual extrusion. With
single extrusion printing, you can choose which print head to use for making
the print. Dual extrusion printing is useful if you want to print with two colours
or print complex models that require supporting material.
Perform the following steps to print a model on the printer from a Gcode file
saved to the SD™ card.
Generating Gcode
① Plug the included SD™ card into an SD card reader on your computer.
② Double-click the REXprint shortcut to launch the software.
③ Click Print > Machine Type and select the Flashforge Creator Max 3D Printer
entry.
www.bresser.de
61