Bresser T-Rex Instruction Manual page 62

④ Click the Load icon to load a .STL model file. The model will display within the
build area.
⑤ Double-click the Move icon, then click the On the Platform and Center
buttons to ensure the model is in contact with the centre of the build
platform
⑥ Click the Print icon, then change the settings as appropriate for your
filament type and model.
 Preview: Check the Preview box if you want to preview the model after
slicing is done.
 Print When Slice Done: Because we are printing from the SD™ card, uncheck
this box to save the Gcode file to the SD card.
 Machine Type: Select Flashforge Creator Max 3D Printer.
 Material Right: Select the type of filament you are using.
 Material Left: Select the type of filament you are using.
 Supports: If your model has overhanging elements, enable the Supports
option.
 Raft: It is recommended to enable the Raft option.
 Resolution: It is recommended to select the Standard option.
 More Options: It is recommended to leave them at the default values.
www.bresser.de
62