Bresser T-Rex Instruction Manual page 17

Preheat Temperature Screen
The Preheat Menu is displayed by touching
the Preheat button on the Top Menu.
 Touch the slider buttons to turn extruder and
platform heating on or off.
 Touch the target temperature buttons to set the
preheat temperature. The default target print
temperature for the extruders is 230°C and 100°C for
the platform.
 Touch the Start button to start preheating the
extruder(s) and/or platform.
 Touch the Back button to return to the previous
menu.
Preheating Screen
The Preheating Screen is displayed during the
preheating process. It displays the preheating
progress, as well as the actual and target
temperatures of each element.
 Touch the Stop button to abort the preheating
process.
 Touch the Back button to return to the previous
menu.
Tool Menu
The Tool Menu is displayed by touching the
Tool button on the Top Menu.
 Touch the Filament button to load or unload
filament.
 Touch the Level button to level the build plate.
 Touch the Home button to move the extruder to the
home position.
 Touch the Manual button to display the Manual
Adjustment Screen.
 Touch the Setting button to display the Setting
Menu.
 Touch the Status button to display the Printer Status
Screen.
 Touch the About button to display About Screen.
 Touch the Back button to return to the previous
menu.
www.bresser.de
17