Bresser T-Rex Instruction Manual page 16

Print Progress Screen
The Print Progress Screen is displayed while
printing is in progress. It shows the print file
name, the actual and target temperatures,
and the print progress with the remaining
time displayed.
 Touch the Stop button to cancel the print in
progress.
 Touch the Pause button to pause the print. Touch
the Resume button to resume printing.
 Touch the Tools button to display the Print Tools
Menu.
Print Tools Menu
The Print Tools Menu is displayed by touching
the Tools button on the Print Progress Screen.
 Touch the Filament button to change filament
during printing. Note that the print must be paused
first.
 Touch the Camera button to turn the camera on or
off.
 Touch the Cancel button to return to the Print
Progress Screen.
Preheat Menu
The Preheat Menu is displayed by touching
the Preheat button on the Top Menu.
 Touch the slider buttons to turn extruder and
platform heating on or off.
 Touch the target temperature buttons to set the
preheat temperature. The default target print
temperature for the extruders is 230°C and 100°C for
the platform.
 Touch the Start button to start preheating the
extruder(s) and/or platform.
 Touch the Back button to return to the previous
menu.
www.bresser.de
16