Table of Contents
Advertisement
⑦ Click OK to save the Gcode file to the SD™ card. You can rename the file as
desired and save it as either a .g or .gx file. Files with a .gx extension can be
previewed, while .g files cannot.
⑧ Eject the SD™ card, then plug it into the SD card slot on the printer.
⑨ Power on the printer.
⑩ Ensure that the build plate is leveled and that filament is loaded.
⑪ Touch the Print button on the printer display.
⑫ Touch the SD card button, then locate and load your model file.
⑬ Touch the Print button to begin printing. The printer will begin heating the
extruder and/or platform, then will begin printing once the target
temperatures are reached. Touch the Stop button at any time to cancel the
print. Touch the Pause button to pause the print.
www.bresser.de
63
Advertisement
Table of Contents
