Table of Contents
Advertisement
6.2.10 Connecting the Printer
There are three ways of connecting the REXprint software with the printer - a
wired USB connection or a wireless Wi-Fi® connection in AP mode or STA
(Station) mode.
USB Connection
Perform the following steps to connect your PC to the printer using a wired USB
connection.
1. Plug one end of the included USB cable into the USB port on the printer, then
plug the other end into an available USB port on your computer.
2. Power on the printer and your computer, then start the REXprint software.
3. Click Print > Connect Machine.
4. Set the Connection Mode to USB and set the Select Machine option to the
printer. When the printer does not appear in the Select Machine list, click the
Rescan button.
If it still does not appear, reinstall the driver software.
www.bresser.de
56
Advertisement
Table of Contents
