Bresser T-Rex Instruction Manual page 54

6.2.8 Tools Menu
The Tools Menu contains the following options.
Control Panel: Click Tools > Control Panel to modify the printer's settings from
within REXprint.
Note that if you are not connected to the printer, you will be prompted to do so
before the Control Panel can be displayed.
 Jog Mode: The Jog Mode section allows you to select the
distance that the extruder and build plate move with each
mouse click.
 Six Blue Arrow Buttons: The buttons allow you to manually
move the extruder and build plate. The amount they will move
with each click of the mouse is determined by the Jog Mode
settings.
 Stop: Click the Stop button to abort any current movement.
 XYZ Coordinates: Displays the current position of the extruder
and build plate. You cannot edit the displayed values.
 Make Current Position Zero: Click the Make Current Position
Zero button to set the zero position for the three axes.
 Centre XYZ: Click a Centre button to move the extruder or build
plate to the zero position for that axis.
 Set X/Y Speed: Sets the speed at which the extruder moves.
 Set Z Speed: Sets the speed at which the build plate moves.
www.bresser.de
54